论文标题
滑动模式网络外围控制
Sliding Mode Network Perimeter Control
论文作者
论文摘要
城市交通拥堵是美国和全球许多城市面临的慢性问题。它导致基础设施使用效率低下,并提高了车辆燃料消耗和排放水平。拥塞与延迟交织在一起,因为道路使用者在道路上浪费了宝贵的时间,从而降低了生产力。研究人员已经开发并继续开发了减轻此问题的工具和系统。网络外围控制是已广泛研究的一种工具。它试图控制进入保护区的车辆的流动,以确保未达到网络基本图(NFD)预先确定的拥挤政权。在本文中,提出了从滑动模式控制理论得出的方法。它比比例综合控制器的主要优点包括(1)最小调整,(2)无需对NFD形状的理事方程式线性化,(3)没有假设,以及(4)在不需要重新调整控制器的情况下处理各种需求轮廓的能力。在拥挤的网络网络上实现并测试了一个滑动模式控制器。结果表明,拟议的控制器可有效地产生范围内的延迟节省并分散拥塞。
Urban traffic congestion is a chronic problem faced by many cities in the US and worldwide. It results in inefficient infrastructure use as well as increased vehicle fuel consumption and emission levels. Congestion is intertwined with delay, as road users waste precious hours on the road, which in turn reduces productivity. Researchers have developed, and continue to develop, tools and systems to alleviate this problem. Network perimeter control is one such tool that has been studied extensively. It attempts to control the flow of vehicles entering a protected area to ensure that the congested regime predetermined by the Network Fundamental Diagram (NFD) is not reached. In this paper, an approach derived from sliding mode control theory is presented. Its main advantages over proportional-integral controllers include (1) minimal tuning, (2) no linearization of the governing equations, (3) no assumptions with regard to the shape of the NFD, and (4) ability to handle various demand profiles without the need to retune the controller. A sliding mode controller was implemented and tested on a congested grid network. The results show that the proposed controller produces network-wide delay savings and disperses congestion effectively.