论文标题

高度呼尾的布拉格光栅用于集成二氧化硅光谱仪

Highly-Chirped Bragg Gratings for Integrated Silica Spectrometers

论文作者

Field, James W., Berry, Sam A., Bannerman, Rex H. S., Smith, Devin H., Gawith, Corin B. E., Smith, Peter G. R., Gates, James C.

论文摘要

在平面二氧化硅波导装置中,燃烧的thed鼠光栅用于为光谱仪创建一个集成的衍射元件。光栅衍射从波导中的光,并以类似于散装衍射光谱仪的方式创建依赖波长的焦点。外部成像系统用于分析光,后来的设备迭代计划,以整合检测器以制造完全集成的光谱仪。用光栅周期射击速率超过100nm/mm,可实现5.5mm的焦距。昏迷畸变的校正导致占地面积为20mm x 10mm的设备,峰值FWHM分辨率为1.8nm,典型的FWHM分辨率为2.6nm,并以1550nm为中心的160Nm带宽工作。

A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors to make a fully integrated spectrometer. Devices were fabricated with grating period chirp rates in excess of 100nm/mm, achieving a focal length of 5.5mm. Correction of coma aberrations resulted in a device with a footprint of 20mm x 10mm, a peak FWHM resolution of 1.8nm, a typical FWHM resolution of 2.6nm and operating with a 160nm bandwidth centered at 1550nm.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源