论文标题
使用闪烁的BN/ZNS树脂的3D打印中子检测器
3D Printing Neutron Detectors using Scintillating BN/ZnS Resin
论文作者
论文摘要
在本文中，我们证明，可以使用立体信誉添加剂制造生产低成本中子敏感的探测器。通过将BN：Zns与市售紫外线树脂混合来制作可固化的闪烁树脂。该树脂用于打印几个小面积的中子探测器，该检测器由BN阵列制成：ZnS锥体可以直接耦合到光电管中。
In this paper we demonstrate that it is possible to produce low cost neutron-sensitive detectors using stereo-lithography additive manufacturing. A curable scintillating resin is made by mixing BN:ZnS with a commercially available UV resin. This resin is used to print several small area neutron detectors made of arrays of BN:ZnS cones that can be directly coupled to a photo-multiplier tube.
