论文标题
钛的冷蠕变:使用同步加速器衍射和晶体可塑性模拟分析应力松弛
Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations
论文作者
论文摘要
有一个长期存在的技术问题,在室温下,在Ti室温下循环载荷期间的压力会导致大量疲劳寿命降低。据认为,以软晶粒为导向的局部时间依赖性的可塑性,可轻松塑料滑动导致负载脱落,并且在附近的硬纹理中的压力增加,以便于易于滑动。量化这段时间的依赖性可塑性过程是成功预测复杂的冷住宿疲劳问题的关键。这项工作使用了应力松弛测试期间原位同步加速器X射线衍射的新方法,以量化依赖时间的可塑性。将来自多个晶格家族(21个衍射环)的测得的晶格菌株与晶体可塑性有限元(CPFE)模拟的模拟晶格菌株进行了比较。与基础滑动相比,发现棱镜滑动参数显示出更强的应变速率敏感性,这对冷蠕变期间的硬晶粒方向有重大影响。
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring hard grain poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. This work uses a novel approach of in situ synchrotron X-ray diffraction during stress relaxation tests, to quantify the time dependent plasticity. Measured lattice strains from multiple lattice families (21 diffraction rings) were compared with simulated lattice strains from crystal plasticity finite element (CPFE) simulations. The prism slip parameters were found to show stronger strain rate sensitivity compared to basal slip, and this has a significant effect on stress redistribution to hard grain orientations during cold creep.