论文标题

用于传播微波模式的数字分辨的光聚合

Number-resolved photocounter for propagating microwave mode

论文作者

Dassonneville, Rémy, Assouly, Réouven, Peronnin, Théau, Rouchon, Pierre, Huard, Benjamin

论文摘要

最近使用超导电路实现了传播微波光子的检测器。但是,仍然缺少数字分辨的光聚合。在这封信中,我们演示了一个单发柜台,用于传播微波光子,该光子最多可以解决$ 3 $的光子。它基于泵送的Josephson环调制器,该调制器可以通过频率转换来捕获任意传播模式,并将其量子状态存储在固定内存模式下。然后,使用一系列二进制问题在内存模式下计算在存储模式下光子的数量。使用基于测量的反馈,问题的数量是最小的,并且具有最大光子数量的对数。该检测器的检测效率为$ 0.96 \ pm 0.04 $,平均死时间为$ 4.5〜 \ mathrm {μs} $的深度计数概率为$ 0.030 \ pm 0.002 $。为了最大程度地提高其性能,该设备首先用作\ emph {原位}波形检测器,从中计算和应用最佳泵。根据传入光子的数量,检测器的概率从$(54 \ pm 2)\%$到$ 99 \%$不等。

Detectors of propagating microwave photons have recently been realized using superconducting circuits. However a number-resolved photocounter is still missing. In this letter, we demonstrate a single-shot counter for propagating microwave photons that can resolve up to $3$ photons. It is based on a pumped Josephson Ring Modulator that can catch an arbitrary propagating mode by frequency conversion and store its quantum state in a stationary memory mode. A transmon qubit then counts the number of photons in the memory mode using a series of binary questions. Using measurement based feedback, the number of questions is minimal and scales logarithmically with the maximal number of photons. The detector features a detection efficiency of $0.96 \pm 0.04$, and a dark count probability of $0.030 \pm 0.002$ for an average dead time of $4.5~\mathrm{μs}$. To maximize its performance, the device is first used as an \emph{in situ} waveform detector from which an optimal pump is computed and applied. Depending on the number of incoming photons, the detector succeeds with a probability that ranges from $(54 \pm 2)\%$ to $99\%$.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源