学术文献库

In real applications, drops always impact on solid walls with various inclinations. For the oblique impact of a Leidenfrost drop, which has a vapor layer under its bottom surface to prevent its direct contact with the superheated substrate, the drop can nearly frictionlessly slide along the substrate accompanied by the spreading and the retracting. To individually study these processes, we experimentally observe ethanol drops impact on superheated inclined substrates using high-speed imaging from two different views synchronously. We first study the dynamic Leidenfrost temperature, which mainly depends on the normal Weber number ${We}_\perp $. Then the substrate temperature is set to be high enough to study the Leidenfrost drop behaviors. During the spreading process, drops always keep uniform. And the maximum spreading factor $D_m/D_0$ follows a power-law dependence on the large normal Weber number ${We}_\perp $ as $D_m/D_0 = \sqrt{We_\perp /12+2}$ for $We_\perp \geq 30$. During the retracting process, drops with low impact velocities become non-uniform due to the gravity effect. For the sliding process, the residence time of all studied drops is nearly a constant, which is not affected by the inclination and $We$ number. The frictionless vapor layer results in the dimensionless sliding distance $L/D_0$ follows a power-law dependence on the parallel Weber number $We_\parallel$ as $L/D_0 \propto We_\parallel^{1/2}$. Without direct contact with the substrate, the behaviors of drops can be separately determined by ${We}_\perp $ and $We_\parallel$. When the impact velocity is too high, the drop fragments into many tiny droplets, which is called the splashing phenomenon. The critical splashing criterion is found to be $We_\perp ^*\simeq$ 120 or $K_\perp = We_\perp Re_\perp^{1/2} \simeq$ 5300 in the current parameter regime.