论文标题

过渡金属二甲基元素太阳能电池中的高开路电压

High open-circuit voltage in transition metal dichalcogenide solar cells

论文作者

Svatek, Simon A., Bueno, C., Lin, Der-Yuh, Kerfoot, James, Macías, Carlos, Zehender, Marius H., Tobías, Ignacio, García-Linares, Pablo, Taniguchi, Takashi, Watanabe, Kenji, Beton, Peter, Antolín, Elisa

论文摘要

基于分层材料的超薄太阳能电池的转化效率受到其开路电压的限制,通常将其固定在0.6 V以下的值下。在这里,我们报告说,在120 nm-Thick垂直的垂直堆叠的同型同种口气中,用替代型摩擦式摩擦式摩擦液制造的开路电压为1.02V。这种高的开路电压与MOS2同型结中的频带对齐一致,MOS2同型比在广泛使用的TMDC异质结构中更有利。这也归因于替代掺杂的MOS2的高性能,特别是用NB掺杂的p型材料,这是通过隧穿石墨烯/bn/mos2结构的电致发光证明的,尽管有块状MOS2的间接性质。我们发现,照明TMDC/金属触点会降低MOS2范德华的测得的开路电压,因为它们具有光活性,这表明需要开发低耐性的掺杂MOS2,以便在实用设备中实现高效率。此处证明的高开路电压证实了分层过渡金属二分裂基因源的潜力,以开发高效,超薄的太阳能电池。

The conversion efficiency of ultra-thin solar cells based on layered materials has been limited by their open-circuit voltage, which is typically pinned to a value under 0.6 V. Here we report an open-circuit voltage of 1.02 V in a 120 nm-thick vertically stacked homojunction fabricated with substitutionally doped MoS2. This high open-circuit voltage is consistent with the band alignment in the MoS2 homojunction, which is more favourable than in widely-used TMDC heterostructures. It is also attributed to the high performance of the substitutionally doped MoS2, in particular the p-type material doped with Nb, which is demonstrated by the observation of electroluminescence from tunnelling graphene/BN/MoS2 structures in spite of the indirect nature of bulk MoS2. We find that illuminating the TMDC/metal contacts decreases the measured open-circuit voltage in MoS2 van der Waals homojunctions because they are photoactive, which points to the need of developing low-resistance, ohmic contacts to doped MoS2 in order to achieve high efficiency in practical devices. The high open-circuit voltage demonstrated here confirms the potential of layered transition-metal dichalcogenides for the development of highly efficient, ultra-thin solar cells.

扫码加入交流群

加入微信交流群

微信交流群二维码

扫码加入学术交流群,获取更多资源