BS IS0/IEC 29183:2021 Tracked Changes compares BS ISO/IEC 29183:2021 with BS IS0/IEC 29183:2010 BSl Standards Publication Information technology Office equipment - Method for measuring digital copying productivity for a single one-sided original bsi. TRACKED CHANGES IMPORTANT PLEASE NOTE This is a tracked changes copy and uses the following colour coding Text example 1 indicates added text (in green) Text example 2 indicates removed text (in red) indicates added graphic figure or table indicates removed graphic figure or table About Tracked Changes This document is a PDF containing a Tracked Changes version of BS ISO/IEC 29183, which compares BS IS0/IEC 29183:2021 with BS IS0/IEC 29183:2010. The original version of BS IS0/IEC 29183:2021, appended at the end of this document, should be considered the version of record for this publication. @ The British Standards Institution 2021 Published by BSI Standards Limited 2021 ISBN9780539179286 Amendments/corrigenda issued since publication Date Text affected BS IS0/IEC 29183:2021 — Tracked Changes National foreword This British Standard is the UK implementation of ISO/ IEC 29183:2021. It supersedes BS IS0/IEC 29183:2010, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges. A list of organizations represented on this committee can be obtained on request to its committee manager Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk The recipient is advised to consider seeking professional guidance withrespectto its use ofthis publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 20112021 Published by BSI Standards Limited 20112021 ISBN 978-0 580 70326 3978 0 580 99443 2 ICS 37.100.10 Compliance with a British Standard cannot confer immunity fromlegalobligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2021. Amendments/corrigenda issued since publication Date Textaffected